Hiyasu ASE7U-RC Manual Del Usuario página 37

7. Dripping water may generate on the surface of the indoor unit when cooling in a high relatively humidity
(relative humidity higher than 80%). Adjust the horizontal louver to the maximum air outlet position and
select HIGH fan speed.
8. Heating mode (For cooling and heating models only)
The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit during
heating operation. When the outdoor temperature falls, heat drawn in by the air conditioner decreases
accordingly. At the same time, heat loading of the air conditioner increases due to larger difference
between indoor and outdoor temperature. If a comfortable temperature can't be achieved by the air
conditioner, we suggest you use a supplementary heating device.
9. Auto-restart function(optional)
Power failure during operation will stop the unit completely.
For the unit without Auto-restart feature, when the power restores, the OPERATION indicator on the
indoor unit starts flashing. To restart the operation, push the ON/OFF button on the remote controller.
For the unit with Auto-restart feature, when the power restores, the unit restarts automatically with all the
previous settings preserved by the memory function.
10. Lightning or a car wireless telephone operating nearby may cause the unit to malfunction.
Disconnect the unit with power and then re-connect the unit with power again. Push the ON/OFF button
on the remote controller to restart operation.
35