Indicators On Display Panel - Hiyasu ASE7U-RC Manual Del Usuario

Indicators on Display Panel

DIGITAL DISPLAY area
TRANSMISSION
Indicator
OPERATION MODE
Indicator
LOCK Indicator
TIMER DISPLAY
Indicator

DIGITAL DISPLAY area: This area will show the set temperature and, if in the TIMER mode, will show the
ON and OFF settings of the TIMER. If in the FAN mode, nothing is appeared.

TRANSMISSION Indicator: This indicator flashes one time when remote controller transmits signals to
the indoor unit.

ON/OFF Indicator: This symbol appears when the unit is turned on by the remote controller, and
disappear when the unit is turned off.

OPERATION MODE Indicator: When press the MODE button, it shows the current operating mode --
AUTO, COOL, DRY, HEAT (Cooling only model without) or FAN mode.

LOCK Indicator: LOCK display is displayed by pushing the LOCK button. Push the LOCK button to clear
display.

TIMER DISPLAY Indicator: This display area shows the settings of the TIMER. That is, if only the starting
time of operation is set, it will display the TIMER ON. If only the turning off time of operation is set, it will
display the TIMER OFF. If both operations are set, it will show TIMER ON-OFF which indicates you have
chosen to set both the starting time and off time.

FAN SPEED Indicator: Press the FAN SPEED button to select the desired fan speed setting (Auto-Low-
Med-High). You selection will be displayed in the LCD window except the Auto fan speed.
NOTE:
All signs shown in the Fig.2 is for the purpose of clear presentation. But during the actual operation only the
relative functional signs are shown on the display panel.
Display Panel
1
2
4
5
TIMER ON OFF
6
Fig. 2
3
ON/OFF Indicator
OPERATION MODE
4
Indicator
7
FAN SPEED Indicator
22