Programmed Playback - Teac MC-DX10MKII Manual Del Usuario

Up to 64 tracks can be programmed in the desired order.
Shuffle function doesn't work during programmed playback.
1
Press the FUNCTION button to select "CD".
2 Press the MEMORY button in the stop mode.
CD
The PRG (program) indicator appears on the display.
< To cancel the programme mode, press the Stop button (H).
3
Press the Skip button (. or /) repeatedly to select
a folder of a MP3 disc, then press the MEMORY button.
< MP3 tracks recorded out of folders are in the "01" (ROOT)
folder.
< Skip this step when programming a CD.
12

Programmed Playback

MP3
FUNCTION
MEMORY
4 Press the Skip button (. or /) repeatedly to select
a track, then press the MEMORY button.
The track is programmed, and "P-02" is displayed.
3 4
< Repeat steps and to programme more tracks.
< You can programme up to 64 tracks.
5
When the selection of track numbers is completed,
press the Play/Pause button (G/J) to start programme
playback.
< When the playback of all the programmed tracks has finished,
or if one of the following buttons is pressed, the PRG
indicator will go off and the programme mode will be
cancelled:
STOP (H), FUNCTION, STANDBY/ON
The programme is retained in memory until the OPEN/CLOSE
button is pressed or the power is interrupted. You can return
to the programmed playback by pressing the MEMORY
button and the Play/Pause button (G/J). (If another source
was selected, select the CD mode by pressing the FUNCTION
button beforehand.)