Parker NitroFlow Lab Guia Del Usuario página 24

SCREEN 3/5
Data
Outlet
Inlet
C Inlet
SCREEN 4/5
Data
Remote
SCREEN 5/5
Button
O2 – 20.9%
Flow Factor
Replace Filter
Continues on next page.
K3.1.142M Manual NitroFlow Lab
Explanation
Outlet pressure in either BAR or PSI
Inlet/compressor pressure in either BAR or PSI
Compressed air inlet temperature in °C or °F
Explanation
YES or NO
Shows whether remote control option is on or off
Explanation
Calibrate O sensor to 20.9%. Contact Parker's technical support team.
2
Only visible when selected Show Flow in the options menu
and when the unit is running. Calibrate the flow by entering the flow measured
with an external flow meter.
When a filter has been replaced during maintenance, this button can be touched
and the countdown for the new filter is set. System asks for confirmation. In
maintenance screen 1/5 the filter lifetime should read 8000 hr.
(refer to §6.3.4)
- 23 -