Introduction; Pictograms - Parker NitroFlow Lab Guia Del Usuario

1

Introduction

1.1 General
®
The NitroFlow Lab is a product of Parker. This manual forms an integral part of the product. The manual describes
the installation, daily operation and troubleshooting.
Content
Read the manual carefully before you start with the generator. These instructions must be thoroughly understood
before installing and operating this product. Failure to operate this product in accordance with the instructions set
forth in this manual and by other safety governing bodies will void the safety certification of this product. If you have
any questions or concerns, please call your local representative or the technical services department:
Europe +44 (0) 191 402 9000
Condition of change
No changes may be made to the generator as supplied, without explicit prior written permission by Parker. Non-
conformance to this rule, as well as any consequential damage, loss and costs are the responsibility of the owner
and the user.
Information
All information in this manual, including additional drawings and technical descriptions, remains the property of
Parker and may not be used (otherwise than for the use of this product), copied, multiplied or published to or for a
third party without explicit prior written permission by Parker.
1.2

Pictograms

In this manual and on the generator, the following pictograms are used:
Warning
A warning shows a hazard that can cause death or serious injury. Follow the instructions.
Caution
A caution shows a danger that can cause damage to the equipment. Follow the instructions.
Electricity
High voltage: danger of electric shock.
Warning
Risk for death due to suffocation.
Risk of fire
Oxygen-enriched air leads to an increased risk of fire in the event of contact with inflammable
products.
High-pressure risk
Follow the instructions with respect to compressed gasses.
Environment
Instructions with respect to the environment.
Read instructions in the manual.
K3.1.142M Manual NitroFlow Lab - 4 -