Replace motor protection filter
Release and remove the filter cover.
Remove the main filter basket.
Remove the motor protection filter.
Insert new motor protection filter.
Insert main filter basket.
Insert and lock the filter cover.
Troubleshooting
DANGER
Turn the appliance off and remove the bat-
tery before carrying out any tasks on the
machine.
Note: In case of a failure (e.g. filter break-
age) the appliance must be turned off im-
mediately. The failure must be remedied
before the appliance is put into operation
again.
The appliance shuts off during the
operation
– Motor thermal protector has responded.
Replace the fleece filter bag or paper fil-
ter bag (option).
Replace motor protection filter.
Check all parts for plugging.
Switching back on after the motor turbine
has cooled off, after approx. 60 minutes.
Dust comes out while vacuuming
Replace the defective fleece filter bag
or paper filter bag (option).
Check the fleece filter bag or paper filter
bag (option).
Insert/lock the filter cover correctly.
Insert undamaged main filter basket.
Reinsert motor protection filter correct-
ly.
10
All manuals and user guides at all-guides.com
Replace the fleece filter bag or paper fil-
Clean the main filter basket under run-
Insert/lock the filter cover correctly.
Remove choking of suction nozzle, suc-
Replace defective suction hose.
Replace the fleece filter bag or paper fil-
Insert/lock the filter cover correctly.
Clean the main filter basket under run-
Insert undamaged main filter basket.
Replace motor protection filter.
Turn on the appliance.
– PCB overheated
Note: The appliance can be operated in
battery mode after the PCB has cooled
down.
– Battery empty
Charge the battery.
– No battery is inserted
Insert the battery.
If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.
– 5
EN
Suction capacity decreases
ter bag (option).
ning water and dry it.
No or insufficient suction
tion tube or suction hose.
ter bag (option).
ning water and dry it.
Appliance is not running
Customer Service