Bosch EXACT Manual Original página 19

Description of the Operating
Controls
Overview
(1)
(2)
(3)
(4)
Main menu/toolbar
Menu Command/submenu
File New
Open
Save
Exit
Device Connect
Disconnect
Read parameter set
Save parameter set
Reset to factory settings
Options Change language
Settings
Change user password
Help UNI instructions 4.1
UNI instructions 5.1
About Bosch EXACT Con-
figurator
Bosch Power Tools
Structure of the User Interface
(1) Main menu
(2) Toolbar with buttons
(3) Parameter window
(4) Protocol window
Button Description
Opens a new, empty parameter set (even without screwdriver con-
nected).
Opens the Windows-standard Open dialogue box to select a previ-
ously saved parameter set.
Note: Only xml files can be read.
Opens the Windows-standard Save As dialogue box to save the
parameter set currently displayed.
Note: Only xml files can be saved.
Ends the Bosch EXACT Configurator program.
Opens the Select Device dialogue box. Once the required screw-
driver is selected, a connection to the screwdriver is established.
Disconnects the currently selected screwdriver.
Reads the current parameter set and displays it in the parameter
window.
Applies and saves the displayed parameter set to the connected
screwdriver.
Resets the connected screwdriver to factory settings.
Option to select the language for the user interface (e.g. German
or English).
The selection is not activated until the program is restarted.
Opens the Settings window with the Logging tab to configure the
log window.
Enables you to set and change a password.
Opens the operating instructions as a PDF file.
You will need Adobe Acrobat Reader to view this.
Opens the operating instructions as a PDF file.
You will need Adobe Acrobat Reader to view this.
Displays the software version.
English | 19
1 609 92A 606 | (20.01.2021)