Bosch EXACT Manual Original página 25

General Tab
Parameter
Trigger Repeat Protection
Buzzer Intensity
(For EXACT 12V only)
Light intensity OK/NOK indicator
LED
(For EXACT 12V only)
Light intensity battery indicator
LED
(For EXACT 12V only)
Light intensity work area light
(For EXACT 12V only)
Work area Light
Work area light Fadeout
(For EXACT 12V only)
Bosch Power Tools
Description
The trigger repeat protection prevents the tool
from restarting within a specific time frame
after the on/off switch is released. This is de-
signed to help prevent double hits that might
break the screws.
The volume of the buzzer can be adjusted.
The light intensity of the OK/NOK indicator LED
can be adjusted.
The light intensity of the battery indicator can
be adjusted.
The light intensity of the work area light can be
adjusted.
The illuminating LED, or worklight, is designed
to light up the screw location, making it easier
to find the screw head.
The parameter can be set to suit the working
requirements.
The worklight fades out slowly.
English | 25
Value
Adjustable within the set limits
100 %
can be adjusted between 0 % and
100 % in 10 % increments
100 %
can be adjusted between 0 % and
100 % in 10 % increments
100 %
can be adjusted between 0 % and
100 % in 10 % increments
100 %
can be adjusted between 0 % and
100 % in 10 % increments
Active during operation
LED comes on when the on/off switch
is pressed lightly.
Not active
Active and afterglow
LED stays on for approx. 2 minutes
after use.
On
Worklight fades out slowly
Off
Worklight fades out quickly
1 609 92A 606 | (20.01.2021)