Bosch EXACT Manual Original página 23

Parameter Description
General Information
If it is possible to adjust the numerical value of a parameter,
then the Maximum and Minimum permitted values will be
displayed next to the unit in the parameter field.
Identification Data Tab
Parameter
Device Type
Tool Number
Serial Number
Inventory Number
Gear Ratio
MCU Hardware Version
(For EXACT 12V only)
IFU Hardware Version
(For EXACT 12V only)
Firmware Version
(For EXACT 12V only)
Bosch Power Tools
You can either type the new value straight into the field
within the set limits or increase/decrease the existing value
using the arrow buttons.
Activated screw phases are highlighted in blue. Adjustments
that have not yet been applied to the screwdriver are dis-
played in red font.
Description
Screwdriver trade name
Screwdriver article number
The article number is displayed on the screw-
driver type plate.
Screwdriver serial number
The serial number is also displayed on the
screwdriver type plate.
Screwdriver's unique inventory number
Standard option
Screwdriver's total gear ratio; on the ANGLE
EXACT ION, this always includes the ratio of the
angle head
Manual option
Value for a different output (e.g. geared offset
head or auxiliary transmission)
Hardware version of the power electronics
Hardware version of the display electronics
Firmware version
English | 23
Value
Cannot be changed
Cannot be changed
Cannot be changed
Maximum 25 digits (no special char-
acters permitted)
Cannot be changed
Adjustable within the set limits
Cannot be changed
Cannot be changed
Cannot be changed
1 609 92A 606 | (20.01.2021)