Intended Use; Technical Description; Connecting The Rv-350 - Waeco PerfectView LCD350 Instrucciones De Montaje

_RV-350.book Seite 9 Montag, 21. Mai 2007 2:16 14
PerfectView LCD 350
3

Intended use

The RV-350 rear view video system is a video system primarily designed for use
in passenger cars or caravans and HGVs with a 12 V power supply. It enables the driver
to observe the area directly behind the vehicle from the driver's seat, for example, when
parking.
Since the rear view system is designed merely as an additional aid for reversing, it does
not relieve you of the duty to take proper care when reversing.
4

Technical description

The rear view video system consists of the camera RV-29-T130, a switch box and the
monitor RV-35 LCD. The switch box is switched on via the reversing light. The monitor
and the camera are switched on by the switch box.
5

Connecting the RV-350

Caution!
When connecting the individual components, please observe the safety
instructions and installation instructions in their operating manuals.
The circuit diagram can be found in 1, page 3.
No. in 1,
Description
page 3
1 Monitor RV-35
2 6-pin mini DIN plug
3 6-pin mini DIN socket
4 Monitor connection cable
5 12 V positive cable (red): monitor connection to the positive
terminal of the voltage supply
6 Earth cable (black): monitor connection to the negative terminal
of the voltage supply
7 Cinch socket: monitor connection to the switch box
8 Camera RV-29-T130
9 9-pin mini DIN plug
10 9-pin mini DIN socket
All manuals and user guides at all-guides.com
Intended use
9