Intended Use; Technical Description - Waeco DC-Kit4 Instrucciones De Montaje

Intended use

5 Intended use
The DC extension Kit4 (item no.: 9100300044) is suitable for equipping the
following Dometic roof air conditioners for 12-Vg driving:
 B2600, B3200
 FJ1100, FJ1700, FJ2200, FJ2600, FJ3200
The SinePower MSI2312T inverter is only designed for the cooling device in
the roof air conditioner not for the heating mode, as the heating elements
take more power than the inverter is able to generate in continuous opera-
tion.
I
NOTE
The heat pump function of the B2600 is available when used with
the inverter.
6

Technical description

The DC extension Kit4 enables Dometic roof air conditioners to be used in
vehicles with 12 Vg. The extension kit consists of the following components:
 The ECL-102 charging current distributor with low voltage protection
regulates the power distribution between the starter battery, supply bat-
tery and lightmachine. This prevents the battery and the electronics in the
vehicle from overloading.
 The SinePower MSI2312T inverter supplies the roof air conditioner with
the required input voltage of 230 Vw. The inverter generates the 230 V
voltage from the 12 V on-board electricity supply in the vehicle.
The integrated priority circuit can be used for distributing the voltage in
the vehicle with two available power sources. If a mains voltage and volt-
age created by the inverter (vehicle battery) are both connected to the
device, the use of the mains voltage has priority. If the only voltage avail-
able is that generated by the inverter, the power supply from the battery
is used. This ensures that the limited power of the battery is not used
unnecessarily.
 The MCR-9 remote control can switch the inverter on and off.
24
DC-Kit4
EN