Pr Ob Lem S, Cause S And Solut Ions - Oster BVSTEM6702B Manual De Instrucciones

PR OB LEM S, CAUSE S AND SOLUT IONS

PROBLEM
Coffee does not
come out.
Coffee comes out
around the edge of
the porta-filter.
Milk is not foamy
after frothing or it is
not coming out of
the frothing tube.
Coffee comes out
too quickly.
Coffee is too weak.
The control panel
lights are flashing
alternatively.
CAUSES
•
No water in reservoir.
•
Coffee grind is too fine.
•
Too much coffee in the filter.
•
Appliance was not turned on
or plugged in.
•
Coffee has been tamped/
compressed too much.
•
Porta-filter not rotated to full
lock position.
•
Coffee grounds around the
filter basket rim.
•
Too much coffee in the filter.
•
Ran out of steam.
•
Milk is not cold enough.
•
Frothing tube is blocked.
•
Ground coffee is too coarse.
•
Not enough coffee in filter.
•
Using single filter for double
shot of espresso.
•
Ground coffee is too coarse.
•
Water reservoir is out of
water.
•
Brewing function button was
pressed prior to two control
panel lights becoming solid.
E n g li s h- 16
SOLUTIONS
•
Add water.
•
Grind medium ground coffee.
•
Fill filter with less coffee.
•
Plug unit into electrical
outlet and turn it on.
•
Refill filter basket with
coffee and TAMP GENTLY.
•
Rotate filter holder to full
lock position.
•
Wipe off rim.
•
Fill with less coffee.
•
Ensure there is enough
water in the water reservoir.
•
Chill milk and frothing
pitcher prior to making
cappuccino or latte.
•
Follow the instructions to
clean the milk reservoir &
frothing tube.
•
Use a finer grind.
•
Fill filter with more coffee.
•
Use double filter for double
shot of espresso.
•
Use a finer grind.
•
Add water to reservoir.
•
Wait until two control
panel lights become solid,
indicating machine is ready
to be used.