Installing The Printer Driver - Kyocera KM-6230 Manual De Instrucciones

Section 2 Using the Printer

(2) Installing the Printer Driver

Install the printer driver as follows:
* The printer can be connected to the computer by one of the
following two methods: local or network. If you want to connect
them through network, refer to the operation manual of the
operating system (OS).
* The screens shown in the following explanation are those
displayed when installing the printer driver for Windows 95/98.
* The actual screen is still under development for Windows 95/98
(English OS).
1
Start Windows 95, Windows 98, Windows NT or
Windows 2000.
* If any applications are currently running, exit them.
2
Insert the CD-ROM supplied with the printer into the CD-
ROM drive.
A start window will appear.
3
Click Install Driver in the lower left corner of the window.
* If the start window does not appear even if the CD-ROM is
inserted, double-click My Computer on the desktop, then
double-click the CD-ROM icon.
4
The Set-up Wizard window will appear, so click Next.
A list of printer models will appear.
2-3
All manuals and user guides at all-guides.com
Select the printer you are using, then click Next.
5
6 The language to be used can be selected. Select the
desired language from the box, then click Next.
7
Select the driver type.
From the list, select the type of driver to be installed, then
click Next.
• (XL) Driver: Extension Driver for Windows 95/98
• KPDL2 Driver: Adobe PostScript2 Printer Driver