Lotus BCAO1618 Manual Del Usuario página 32

Fig. 13:
1
Open the vertical panel on the right side of the equipment by removing the screws that hold it.
Fig. 14:
The appliance must be connected directly to the power supply and must be fitted with an upstream switch
2
that is easily accessed and installed to the system in accordance with the regulations in force in the country
where the equipment is installed. This switch must have a contact separation in all poles so as to guarantee
complete disconnection under overvoltage category III. It is mandatory to have a proper earth connection and the
earth wire must not be interrupted by the protective switch for whatever reason.
3
If the equipment includes a superstructure/display with lighting or a condensate collection basin made of polycarbonate/steel
(if applicable), join the two specific connectors.
4
When the operations are completed, close the vertical panel again.
code T7100008 - 0215 - rev. 00
3
3
9
EN
Fig. 15
EN