Publicidad
10
English
WARNING:
Raise the shade of the Pro Shade System for riding at night, through a tunnel, or
any conditions that might cause poor visibility.
Do not use sunglasses with the shade of the Pro Shade System in the lower
position, as this will dangerously darken your view.
If use of a Pinlock anti-fog lens insert is desired, use only a clear lens, as a
tinted lens in combination with the tinted shade will dangerously darken your
view to unacceptable levels.
Use only warm water and a micro-fiber cloth to clean the shield and shade.
Never use petrol, thinner, benzene or any other solvents.Scratched or damaged
shades/shields of the Pro Shade System should be replaced with new ones.
TO REMOVE/INSTALL SHADE
To remove shade for cleaning or replacement, first raise the shade.
Press the release lever on the pivot cover and slide the pivot cover upward to
remove it. Repeat for the other side, and remove the shade.
Publicidad
Capítulos
