Publicidad
①
③
⑤
⑦
30
English
TO REMOVE/REPLACE NECKROLL
First remove the cheekpads as per previous instructions.
②
To remove, pull out the neckroll end tabs, which are inserted into the chin center
pad at both sides ①. Grasp center of the neckroll firmly ②, rotate it to either
direction by 3cm – 4cm (1-1/4" – 1-1/2") ③and remove it from the helmet ④.
To wash the neckroll, put it into lukewarm water with small amount of laundry
soap or your own shampoo and wash gently by hand. Rinse well with fresh
④
water and wipe off with a soft cloth. Dry it in the shade at ambient temperature.
WARNING: Never use petrol, thinner, benzene or any other solvents.
To replace, insert the neckroll frame into the slot of the helmet ⑤, centering
⑥
the neckroll on the helmet ⑥. Further insert the frame so that the 3 tabs on
the frame are locked in the slot of the helmet ⑦.
Replace the neckroll end tabs ⑧, and replace the cheekpads
⑧
Publicidad
Capítulos
