Publicidad
English
TO REMOVE/REPLACE CHINSTRAP COVERS
To remove the chinstrap covers, first remove the cheekpads as per previous
instructions.
Remove the plastic chinstrap anchor cover from the steel chinstrap anchor ①
①
②
and slide the cover off the chinstrap ②.
Note the right and left, inside and outside of the chinstrap covers for
replacement.
To wash the chinstrap covers, put them into lukewarm water with small
amount of laundry soap or your own shampoo and wash gently by hand. Rinse
well with fresh water and wipe off with a soft cloth. Dry them in the shade at
Left chinstrap cover (D-ring side)
Right chinstrap cover (long side)
ambient temperature.
Couvercle gauche de la jugulaire (côté anneau en forme de D)
Couvercle droit de la jugulaire (côté long)
Linke Kinnriemenabdeckung (D-Ring-Seite)
Rechte Kinnriemenabdeckung (lange Seite)
WARNING: Never use petrol, thinner, benzene or any other solvents.
③
④
⑤
To replace the left chinstrap cover (D-ring side), ensure the female chinstrap
end snap side of the chinstrap and the leatherette side of the chinstrap
cover both face outward, slip the chinstrap cover onto the chinstrap ③& ④.
Position the plastic chinstrap anchor cover over the steel anchor and push the
cover in the anchor until the tab on the back of the cover snaps fully home ⑤.
To replace the right chinstrap cover (long side), ensure the cap side of the
⑥
⑦
⑧
chinstrap end snap (Arai logo impressed) on the chinstrap and the leatherette
side of the chinstrap cover both face outward, slip the chinstrap cover onto
the chinstrap ⑥& ⑦. Position the plastic chinstrap anchor cover over the
steel anchor and push the cover in the anchor until the tab on the back of the
cover snaps fully home ⑧.
28
Publicidad
Capítulos
