WARNINGS:
When the plate is switched on for the first time,
or if it has remained unused for a long period, it
should be dried for 30 minutes on switch
position n° 1. This will eliminate any moisture
that may have been absorbed by the insulating
material.
To correctly use the appliance, remember:
- To place a pan on the plate before switching
this on.
- To always use pans with flat and very thick
bottoms (see fig. 7).
- To never use pans that are smaller than the
plate diameters.
- To dry the bottom of the pan before placing
it on the plate.
USE
- Never leave the appliance unattended when
the plates are being used. Make sure that
there are no children in the near vicinity.
Particularly make sure that the pan handles
are correctly positioned and keep a check on
foods requiring oil and graze to cook since
these products can easily catch fire.
- The plates will remain hot for a long period
of time even use after use, never touch them
with the hands or other objects in order to
prevent burns.
- Immediately disconnect the appliance from
the electricity main as soon as cracks are
noted on the surfaces of the plates.
FIG. 7
40