Installing The Grass Catcher - TRAPP MC-850G Manual De Instrucciones

www.trapp.com.br
If your lawn is very high, avoid
 
overloading the engine by using only half
of cutter cutting range, as shown below.
Attached as per drawing below:
Basket fitting the
grass catcher
Note: To check the balance of the blade, place a round tube in the blade hole and check whether the blade is
balanced as in the picture at the side. If it is not, balance it by sharpening the cutting area until the removal of
material reestablishes the balance of the blade.

Installing the Grass Catcher

Grass catcher tube
Blade Balancing
Attachment
Grass catcher
Atenttion!
To do this, disconnect the plug cable,
being careful to incline the equipment with
the spark plug upwards, avoiding oil from
the engine entering into the air filter and
carburetor. Never incline it sideways or
forwards.
41