en
Cleaning the dust box
Clean the dust box of the robot vacuum
cleaner after each use.
There is a storage compartment for the
cleaning brush on the top of the base
station.
^ Open the storage compartment and
remove the cleaning brush.
^ Clean the dust box with the brush
end of the cleaning brush.
^ Clean the bottom of the lid and also
the filter grille using the brush end of
the cleaning brush.
^ Close the lid of the dust box making
sure it clicks into place.
^ Replace the dust box in the robot
vacuum cleaner, making sure it clicks
into position.
46
Replacing the exhaust filter
Replace the exhaust filter in the robot
vacuum cleaner after approx. three
months. Two replacement exhaust
filters are supplied.
There is an exhaust filter in the bottom
of the dust box lid.
^ Unclip the filter grille and replace the
exhaust filter.
^ Close the filter grille making sure it
clicks into position.
Cleaning the roller brush
^ Remove the dust box and place the
robot vacuum cleaner upside down
on a level, clean surface.
^ Remove the roller brush cover.
^ Remove the roller brush, taking care
not to lose the square guide.