Technical Data; Functional Description; Commissioning - Festool DRC 18/4 Manual De Instrucciones

4

Technical data

Cordless drill
Motor voltage
Idling speed*
Adjustable torque**
Chuck clamping range
Drill diameter max.
Fastening in pine
Tool holder in drill spindle
Weight (incl. additional handle, battery pack BP 18 Li 6,2 AS and chuck) as per EP­
TA procedure 01:2014
Weight with Centrotec, without additional handle, without battery pack.
* Speed specifications with fully charged bat­
tery pack.
** The maximum speed is reduced in the lower
torque stages (values in clockwise rotation).
5

Functional description

[1-1] LED light switch
[1-2]
LED lamp
[1-3] Bit store
[1-4] On/Off switch
[1-5] Clamping sleeve
[1-6] Gear switch
[1-7]
Torque thumbwheel
[1-8] Right/left switch
[1-9]
Belt clip
[1-10] Button for releasing the battery pack
[1-11] Insulated gripping surfaces (grey
shaded area)
Max. torque
[1-12] Capacity display button on battery
[1-13] Capacity indicator
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin­
ning of the Operating Instructions.
6
6.1
Inserting the battery pack [2 A]
Removing the battery pack [2 B]
The battery pack is ready to use straight out of
the box and can be charged at any time.
6.2
► Press the LED light switch [1-1]:
1st gear
2nd gear
3rd gear
4rd gear
Soft material (wood)
Hard material (metal)
1st gear 1.2 - 11.5 Nm
2nd gear
3nd gear
4th gear
pack

Commissioning

Changing the battery pack
Light and battery capacity indicator
The LED on the lamp [1-2] is both a light
and a battery capacity indicator .
1x ... LED, working area illumination
English
DRC 18/4
18 V
0 - 400 rpm
0 - 850 rpm
0 - 1850 rpm
0 - 3800 rpm
40 Nm
60 Nm
0.8 - 7.2 Nm
0.6 - 4.7 Nm
0.6 - 2.6 Nm
1.5 - 13 mm
Wood 50 mm
Metal 13 mm
max ∅ 10 mm
1/4''
2.3 kg
1.2 kg
15