Bluetooth Telephone; Hands-Free Phoning With Cellular Phones - Pioneer DEH-P75BT Manual De Instrucciones

Bluetooth Telephone

Hands-free phoning with
cellular phones featuring
Bluetooth wireless technology
1 2
8
If your cellular phone features Bluetooth wire-
less technology, you can connect to this unit
for hands-free, wireless calls, even while driving.
Important
Since this unit is on standby to connect with your
cellular phones via Bluetooth wireless technol-
ogy, using this unit without running the engine
can result in battery drainage.
1 Source icon
Shows which source has been selected.
2 Device name
Shows the device name of the cellular
phone.
3 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from the
actual signal level.
4 User number indicator
Shows the registration number of the cellu-
lar phone.
5 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
! If the battery strength is not available,
3 4 5
6 Incoming call notice indication
Shows when an incoming call has been re-
ceived and not checked yet.
7 Automatic answering/Automatic reject-
ing indicator
Shows AUTO when the automatic answer-
7 6
ing function is on (for more details, refer to
Setting the automatic answering on page
54).
Shows REJECT when the automatic reject-
ing function is on (for more details, refer to
Setting the automatic rejecting on page 54).
8 Calendar display
Shows the date, and time (if connected with
a phone).
! This unit's phone call reception is on standby
when ignition switch is set to ACC or ON.
! The line-of-sight distance between this unit
and your cellular phone must be 10 meters or
less for sending and receiving voice and data
via Bluetooth wireless technology. However,
the transmission distance may become short-
er than the estimated distance, depending on
the environment in use.
! In order to use Bluetooth wireless technology,
devices must be able to interpret certain pro-
files. This unit is compatible with the following
profiles.
— GAP (Generic Access Profile)
— SDP (Service Discovery Protocol)
— OPP (Object Push Profile)
— HSP (Head Set Profile)
— HFP (Hands Free Profile)
from the actual battery strength.
nothing is displayed in the battery
strength indicator area.
Notes
Section
08
39
En