Calling A Number From The Call History; Assigning Preset Numbers - Pioneer DEH-P75BT Manual De Instrucciones

Reproductor de cd/mp3/wma/acc de alta potencia con tecnología inalámbrica bluetooth, sintonizador rds y control de cd múltiple
Ocultar thumbs Ver también para DEH-P75BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section
Bluetooth Telephone
08
3
Push MULTI-CONTROL right to display
the detailed list.
Calling time and date, and phone number are
displayed in the detailed list.
# If the number is already in the Phone Book
then the name is also displayed.
# Turning MULTI-CONTROL clockwise or coun-
terclockwise switches to the previous or next
phone number diplayed in the detailed list.
# If you do not operate anything within about 30
seconds, the list display is canceled automati-
cally.
Calling a number from the Call
History
1
Display the list and select a phone num-
ber.
Display the phone number you want to make a
call.
2
Push MULTI-CONTROL right to display
the detailed list.
Calling time and date, and phone number are
displayed in the detailed list.
# If the number is already in the Phone Book
then the name is also displayed.
3
Press MULTI-CONTROL to make a call.
4
To end the call, press PHONE.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Calling an international number
from the Call History
When calling an international number stored
in the Call History, proceed the country code
with a +.
52
En
1
With the detailed list displayed, press
MULTI-CONTROL and hold to add +.
Pressing and holding MULTI-CONTROL adds
+ to the phone number.
# + can only be added when the detailed list of
Missed call, Dialled call or Received call is se-
lected.
# Pressing and holding MULTI-CONTROL again
deletes +.
2
Press MULTI-CONTROL to make a call.
3
To end the call, press PHONE.

Assigning preset numbers

You can assign up to ten frequently called
phone numbers to number presets (P 1-P10).
1
Display the list and select a phone num-
ber.
Display the phone number you want to store
in memory.
2
Push MULTI-CONTROL right to display
the detailed list.
Calling time and date, and phone number are
displayed in the detailed list.
3
Press and hold one of 0-9 on the remote
control to store the selected phone number
in that preset.
The selected phone number has been stored
in memory. The next time you press the same
preset button, the phone number is recalled
from memory.
# Up to 50 phone numbers (10 phone numbers
for each of the three registered phones and two
guest phones) can be stored in memory.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido