Scanning Tracks Of A Cd; Pausing Cd Playback; Using Compression And Bmx; Selecting The Search Method - Pioneer DEH-P75BT Manual De Instrucciones

Reproductor de cd/mp3/wma/acc de alta potencia con tecnología inalámbrica bluetooth, sintonizador rds y control de cd múltiple
Ocultar thumbs Ver también para DEH-P75BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Built-in CD Player

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1
Use MULTI-CONTROL to select
Scan mode in the function menu.
Scan mode appears in the display.
2
Press MULTI-CONTROL to turn scan play
on.
The first 10 seconds of each track is played.
3
When you find the desired track press
MULTI-CONTROL to turn scan play off.
The track will continue to play.
# If the display has automatically returned to
the playback display, select Scan mode again by
using MULTI-CONTROL.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1
Use MULTI-CONTROL to select Pause in
the function menu.
Pause appears in the display.
2
Press MULTI-CONTROL to turn pause
on.
Playback of the current track pauses.
# To turn pause off, press MULTI-CONTROL
again.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this unit. Each of the functions has a
two-step adjustment. The COMP function bal-
ances the output of louder and softer sounds
at higher volumes. BMX controls sound rever-
berations to give playback a fuller sound. Lis-
ten to each of the effects as you select
through them and use the one that best en-
hances the playback of the track or CD that
you are listening to.
1
Use MULTI-CONTROL to select
Compression in the function menu.
Compression appears in the display.
2
Press MULTI-CONTROL to select your fa-
vorite setting.
Press MULTI-CONTROL repeatedly to switch
between the following settings:
COMP/BMX OFF—COMP 1—COMP 2—
COMP/BMX OFF—BMX 1—BMX 2

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1
Use MULTI-CONTROL to select
Search mode in the function menu.
Search mode appears in the display.
2
Press MULTI-CONTROL to select the
search method.
Press MULTI-CONTROL until the desired
search method appears in the display.
! FF/REV – Fast forward and reverse
! Rough search – Searching every 10
tracks
Section
06
29
En

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido