Dsp; Setting The Equalizer; Selecting The Listening Position - Sony CDX-C9500 Manual De Instrucciones

DSP

Setting the equalizer

You can select an equalizer curve for eight
music types (Rock, Vocal, Jazz, Classic,
Groove, Talk, Techno, and Custom).
You can store and adjust the equalizer settings
for frequency and level.
Selecting the equalizer curve
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (SOUND) repeatedly until "EQ"
appears.
GB
3
Rotate the dial to select the desired
equalizer curve.
Rock y Vocal y Jazz y Classic y Groove y
Talk y Techno y Custom y off
To cancel the equalizing effect, select "off."
After three seconds, the display return to
the normal playback mode.
Adjusting the equalizer curve
1
Press (SOUND) for two seconds.
2
Press (SOUND) repeatedly until "EQ"
appears.
3
Rotate the dial to select the desired
equalizer curve.
Rock y Vocal y Jazz y Classic y Groove y
Talk y Techno y Custom y off
4
Press (5) (t ) .
18
5
Press (2) (T ) or (5) (t ) to select the
desired frequency.
62 Hz y 157 Hz y 396 Hz y 1.00 kHz y
2.51 kHz y 6.34 kHz y 16.0 kHz
6
Rotate the dial to select the desired
level.
If you want to change the equalizer curve to
be adjusted at this time, press (2) (T )
repeatedly until the equalizer curve name
appears to return to step 3.
To restore the factory-set equalizer curve,
press (6) (ENTER) for two seconds.
7
Press (SOUND) for two seconds.
Selecting the listening
position
You can set a delayed time for the sound to
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
centre of the sound field no matter where you
sit in the car.
Display
window
POS
1 All
1 2
POS
2 Front
POS
3 Front-R
3
POS
4 Front-L
POS
5 Rear
POS
off
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (SOUND) repeatedly until "POS"
appears.
Centre of sound
field
Normal setting
(1 + 2 + 3 )
Front part
(1 + 2 )
Right front (2 )
Left front (1 )
Rear part (3 )
Cancel