Setup Procedures - Ikegami ICD-809 Manual De Instrucciones

5-4. Setup procedures

5-4-1. CAMERA ID
(1) CAMERA ID ON/OFF setting
Highlight CAMERA ID.
Using the E, L or R button, access the
ON/OFF setting. Decide the ON or OFF
setting with the L or R button.
(2) ID characters setting
Keep CAMERA ID highlighted and press
the E button.
The screen appears as shown on the
right figure.
① ID Setting for Line and Starting point:
For positioning the cursor, choose
arrow marks, ← or → ,and push R
or L button.
② Choose desired characters, or
numbers, Use buttons of U, D, L, or R to do it.
③ To use E button, to display the selected characters or numbers for ID.
④ To have a space. Select SPACE and push E button. the cursor moves.
⑤ To delete all ID characters and numbers, select CLEAR and push E button.
(3) Positioning of ID Display:
ID display appears when push E button after choose POS. Move ID display to
the desired place and push E button. the ID position is set and the screen goes
back to normal screen.
(4) After this, decide to go back to main menu (RET), or to save data and finish this
procedure (EXIT)
ＳＥＴＵＰ ＭＥＮＵ
ＣＡＭＥＲＡ ＩＤ ＯＦＦ
ＤＡＹ／ＮＩＧＨＴ ＡＵＴＯ
ＳＨＵＴＴＥＲ ＯＦＦ
ＬＩＧＨＴ ＣＯＮＴ． ＬＥＮＳ
ＧＡＩＮ ＡＧＣ
ＷＨＩＴＥ ＢＡＬ． ＡＴＷ１
ＳＹＮＣ ＩＮＴ
ＭＥＮＵ ＬＯＣＫ ＯＦＦ
ＥＸＩＴ ＣＡＮＣＥＬ ＲＥＳＥＴ
ＩＤ ＥＤＩＴ
ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱ
ＲＳＴＵＶＷＸＹＺ
０１２３４５６７８９
・・・・・・・・・・・・・・・・
← →
ＳＰＡＣＥ ＣＬＥＡＲ
ＲＥＴ ＥＸＩＴ ＰＯＳ
E-12
↑ → ↓ ←
：＋−＊／．・