Remote Led Screen Indicators - Domo DO263A Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
maintain this temperature for 7 hours. After this time, the airco will go back to the original set
temperature and the "sleep" function will end.
NOTE : this function can not be selected with the "fan" or "dry" function.
5.
TEMP touch
Use these touches to select the temperature. The temperature can be set between 17°C and
30°C. When pressing both buttons at the same time you can switch between "°C" or "°F".
6.
SHORT CUT touch
With this button you can fix and switch on a preferential setting.
7.
TIMER ON touch

Remote LED Screen Indicators

With this function you can select when the unit must turn on.
Transmission Indicator
8.
TIMER OFF touch
Lights up when remote sends
signal to unit
With this function you can select when the unit must turn off.
ON/OFF display
MODE display
Appears when the unit is turned on,
Displays the current
and disappears when it is turned off
mode, including:
9.
LED touch
AUTO
Remote LED Screen Indicators
COOL
This button turns off the control panel's LED display. This can be used if the display gives too
DRY
much light when you want to sleep. If you press the button a second time, the display will
HEAT
FAN
switch on again.
Transmission Indicator
Lights up when remote sends
signal to unit
SET FUNCTIONS
ON/OFF display
MODE display
Appears when the unit is turned on,
Displays the current
and disappears when it is turned off
AUTO
mode, including:
AUTO
In the AUTO function, the apparatus automatically chooses the right setting depending on the
COOL
chosen temperature. This setting can also be chosen with the remote control.
DRY
HEAT
1.
Choose AUTO with the MODE button on the remote control.
FAN
2.
Set the desired temperature with the TEMP button. The apparatus will determine the
setting accordingly.
You cannot adapt the speed of the ventilation (FAN) in AUTO modus.
FAN SPEED display
COOL
Displays selected FAN SPEED:
HIGH,
MED,
With the COOL function you can cool the room up to a certain temperature.
or
LOW
This display is blank when
1.
Press the MODE button until the COOL indicator lamp is on.
set to AUTO speed.
2.
Use the "+" and "-" buttons on the control panel or the TEMP button on the remote
control to set the desired room temperature.
3.
Use the FAN button on the remote control to set the desired ventilation speed. There are
three settings: LOW
FAN SPEED display
Displays selected FAN SPEED:
HIGH,
MED,
or
LOW
This display is blank when
54
set to AUTO speed.
DO263A
Remote LED Screen Indicators
Remote LED Screen Indicators
Transmission Indicator
Lights up when remote sends
signal to unit
MODE display
Displays the current
MODE display
mode, including:
Displays the current
mode, including:
AUTO
COOL
DRY
HEAT
FAN
TIMER OFF display
TIMER ON display
Displays when TIMER
Displays when TIMER
OFF is set
ON is set
TIMER OFF display
TIMER ON display
Displays when TIMER
Displays when TIMER
OFF is set
ON is set
SILENT display
Not available for this unit
Temperature/Timer display
Displays the set temperature by default, or timer setting
when using TIMER ON/OFF functions
FAN SPEED display
Temperature range: 17-30 C(62 F-86 F)
Displays selected FAN SPEED:
FAN SPEED display
Timer setting range: 0-24 hours
This display is blank when operating in FAN mode.
HIGH,
Displays selected FAN SPEED:
or
LOW
, HIGH
5
SILENT display
or
Not available for this unit
This display is blank when
set to AUTO speed.
This display is blank when
Temperature/Timer display
set to AUTO speed.
Displays the set temperature by default, or timer setting
when using TIMER ON/OFF functions
Temperature range: 17-30 C(62 F-86 F)
o
Timer setting range: 0-24 hours
Transmission Indicator
Lights up when remote sends
signal to unit
ON/OFF display
Appears when the unit is turned on,
and disappears when it is turned off
AUTO
COOL
DRY
HEAT
FAN
ECO display
Not available for
this unit
Battery display
Low battery
detection
SLEEP display
Displays when
SLEEP function
is activated
FOLLOW ME
ECO display
display
Not available for
Indicates that
this unit
the FOLLOW ME
function is on
Battery display
Low battery
Not available for
detection
this unit
SLEEP display
Displays when
SLEEP function
is activated
FOLLOW ME
display
Indicates that
the FOLLOW ME
o
O
O
function is on
Not available for
MED,
this unit
HIGH,
MED,
and AUTO.
LOW
O
O
ON/OFF display
Appears when the unit is turned on,
How To Use The Basic Fun
and disappears when it is turned off
TIMER ON display
TIMER ON display
Displays when TIMER
ON is set
Displays when TIMER
ON is set
How To Use The Basic Fun
3
1
3
ON/OFF
1
COOL operation
1. Press the MODE button to select
SLEEP
COOL mode.
2. Set your desired temperature us
the Temp
3. Press the FAN button to select th
fan speed: AUTO, LOW, MED,or
HIGH.
4. Press the ON/OFF button to star
unit.
COOL operation
SILENT display
1. Press the MODE button to select
Not available for this unit
COOL mode.
2. Set your desired temperature usi
the Temp
3. Press the FAN button to select th
fan speed: AUTO, LOW, MED,or
Temperature/Timer display
HIGH.
4. Press the ON/OFF button to start
Temperature/Timer
Displays the set temperature by d
unit.
Displays the set temp
when using TIMER ON/OFF func
when using TIMER O
Temperature range: 17-30 C(6
Temperature rang
Timer setting range: 0-24 hour
TIMER OF
Displays w
OFF is se
2
ON/OFF
SHORT
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
ION
FOLLOW
SLEEP
SWING
LED
ME
2
SHORT
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
ION
FOLLOW
SWING
LED
ME
or Temp
button
SILENT displ
Not available fo
or Temp
button
o

Publicidad

Tabla de contenido
loading

Tabla de contenido