The Cabinet - Snap-On EEWB333B Manual Del Operador

3.2

THE CABINET

12
11
13
Figure 10
CABINET - Figure 10
11. Display - Easy to read, user friendly display featur-
ing large LEDs and one button functions.
12. Weight Storage Tray - Generous storage for a va-
riety of weight profi les and sizes as well as built in
storage pockets for the standard centering cones.
13. Accessory Storage - Four sturdy side mounted pegs
are supplied for storage of additional accessories.
14. Semi-Automatic Parameter Arm - Rim distance
and diameter is automatically input with the SAPE.
The SAPE is also used in several procedures for
determining accurate rim profi les and tape weight
placement.
15. Foot Operated Shaft Lock -A foot operated shaft
lock is used to stabilize the shaft during the weight
placement process.
16. Shaft Adapter - The easily removable shaft can be
replaced for alternative wheel adapters.
14
15
16
Figure 10a
MAIN SHAFT LOCK
- Fig. 10a
This assist tightening or loosening of the clamping nut.
Note:
This lock is designed only to facilitate orientation
of the wheel and must not be used for braking the
main shaft spin.
1
Figure 10b
SAPE PARAMETER ARM
- Fig. 10b
SAPE arm for distance and rim diameter.
1 SAPE arm, can be extended and hinged upwards.
2 SAPE disk to identify rrim dimensions on all types
of RIM profi les.
EEWB333B
2
11