Start-Up - ALFRA ROTABEST 80SP RL-E Manual De Instrucciones

START-uP

You have received a completely assembled magnetic core drilling machine and detailed operation
manual. Please check the condition of the machine on receipt for any transport damage, and make sure
the delivery is complete. Otherwise contact the manufacturer immediately.
!
Read the operation manual before using the device for the first time!
1. First, check the cable and plug for damage and plug the machine in the power socket.
2. Insert the core drill in the tool holder on the spindle of the motor and check the stability and exact
position of the tool.
3. The lever is pointing upwards meaning the switchable permanent magnet is deactivated so that you can
position the machine. A slight magnetic pre-tension helps with aligning the machine on walls or ceilings.
4. Secure the drilling unit using the safety belt when working on walls and ceilings.
5. Press the lever down as far as it will go and make sure the safety tab audibly latches into place.
Nach dem Runterdrücken des Hebels und dem Schalten des Rechts/Links-Schalters auf Rechtslauf
oder Linkslauf, können Sie den Motor über den seitlichen Motorschalter durch Betätigen der
grünen ON Taste aktivieren.
6. After lowering the lever you can activate the driving motor via the side motor switch by pressing
the green ON switch.
7. By turning the rotary handle, lower the motor and the rotating drill slowly to the work piece.
Ensure sufficient cooling during the drilling process.
8. When you have finished drilling, move the motor upwards and deactivate it with the red OFF switch
on the motor switch unit.
9. Once the motor has come to a complete standstill, remove the swarf, metal shavings and the other
drilling waste using a swarf hook.
10. To deactivate the permanent magnet, press the black safety tab inwards using the ball
of your thumb and lift the lever up.
11. Only then clean the underside of the magnet of swarf, metal shavings or any other residue stuck
to it wearing leather working gloves.
16