Publicidad
Step 13
1
The tabs should insert freely into the
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
D83
Groove
Insert the DRAWER SIDES (D83 and D84) at
å
an angle into the slot at each end of the
DRAWER FRONT (K).
3
Minimum
190 degrees
M64
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M64) to the
å
DRAWER FRONT (K). Tighten one HIDDEN CAM.
Page 18
D84
K
Maximum
Arrow
210 degrees
K
VIEW THE T-LOCK BOX VIDEO
2
With the palm of your hand, tap the
DRAWER BOTTOM down into the groove.
U n
fi n
s u
r f a
D83
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D977) into the
å
grooves in the DRAWER SIDES (D83 and D84) and
DRAWER FRONT (K).
4
D83
M64
Be sure the
DRAWER
BOTTOM inserts
into the DRAWER
BACK groove.
Fasten the DRAWER BACK (D169) to the DRAWER
å
SIDES (D83 and D84) and DRAWER BRACE (M64). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
401632
i s h
e d
c e
D977
D84
K
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
D169
D84
www.sauder.com/services
Publicidad
