Publicidad
Step 3
Fasten ten ANGLE BRACKETS (5G) to the ENDS (A and B).
å
Use ten BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: The ANGLE BRACKETS should be even with the edges
å
of the ENDS.
Fasten a CABINET RIGHT (35GA) to the RIGHT END (A) and
å
a CABINET LEFT (35GB) to the LEFT END (B). Use four GOLD
5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
BLACK 9/16" LARGE HEAD SCREW
(10 used for the ANGLE BRACKETS)
5G
Finished edge
Page 8
1S
B
1
Roller end
5G
(10 used)
A
2
3
3
2
401632
Remember:
Righty tighty.
Lefty loosey.
3S
GOLD 5/16" FLAT HEAD SCREW
(4 used for the RAILS)
Roller end
1
Finished edge
www.sauder.com/services
Publicidad
