Publicidad
Step 14
Insert the SLIDE CAMS (10A) into the large holes in the
å
DRAWER SIDES (D83 and D84).
Fasten a DRAWER RIGHT (35GC) to the DRAWER RIGHT
å
SIDE (D83) and a DRAWER LEFT (35GD) to the DRAWER
LEFT SIDE (D84). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible
å
through the slotted hole in the SLIDE.
Fasten two KNOBS (93K) to the DRAWER FRONT (K).
å
Use two BLACK 1-1/4" FLAT HEAD SCREWS (7S).
2
3
www.sauder.com/services
Roller end
1
D84
K
93K
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
BLACK 1-1/4" FLAT HEAD SCREW
(2 used for the KNOBS)
10A
3S
401632
7S
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D83
2
3
Roller end
1
Page 19
Publicidad
