Growing Your Rogue Xp In Width - Ki Mobility Rogue XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
Y. Growing Your Rogue XP in Width
It is recommended that you follow the below sequence of adjustments when growing your Rogue
XP in width.
Remove the following assemblies from chair in order listed:
1. Upholstery - (see Upholstery Fabric on page 47).
2. Backrest Release Cable - (see Adjusting, Removing and Replacing Backrest Release
Cable for Width Growth on page 40).
3. Rigidizer Bar - (see Replacing Adjustable Backrest Rigidizer Bar on page 42).
4. Footrest Assembly - Adjusting the Footrest (see Adjusting the Footrest on page 34) or
Rogue XP High Mount Flip Under Footrest (see Optional Angle Adjustable Footplate
on page 35). Use section that corresponds with the footrest style found on your chair.
5. Camber Tube - (see Replacing the Camber Tube on page 26).
Replace new assemblies for width adjustment in reverse of order listed above. Reference removal
and replacement instructions.
44