Skil JS314901 Manual Del Propietário página 14

Dust-Blowing Slide Switch
To blow sawdust, move the switch to the blowing setting 0 (Fig. 9).
To turn off the blowing function, move the switch to setting 1 (Fig. 10).
WARNING
Fig. 9
Adjusting the Foot Bevel Angle
Pivot the bevel lever to unlock the foot (Fig.11).
Fig. 11
14
To reduce the risk of injury, always allow the jig saw to come to a complete
stop before changing the dust blowing setting.
Fig. 10