To Select A Page Of Teletext; To Select Index Page; Searching For A Teletext Page While Watching Tv; To Select Double Height Text - JVC AV-28BH8ENB Manual De Instrucciones

To select a page of Teletext

• Press the appropriate digit buttons for the required Teletext
page number.
The selected page number is displayed at the top left corner
of the screen. The Teletext page counter searches until the
selected page number is located, so that the desired page is
displayed on the screen.
• Press “ “ button to move the Teletext screen forward
one page at a time.
• Press “ ” button to move the Teletext screen backward
one page at a time.

To Select Index Page

• To select the page number of the index (generally page
100), press “ “ button.

Searching for a teletext page while watching TV

• In the Teletext mode pressing “
screen to the TV mode. In the TV mode enter a page num-
ber using digit buttons. As you enter last digit of page num-
ber, “ ” sign will replace the page number and flash until
the entered page number is found. Then the page number
will replace “ ” sign again. Now you can display this tele-
text page pressing “ “ button.

To Select Double Height Text

• Press “ “ button for the top half of the information page to
be displayed in double height text.
• Press “ “ button again for the bottom half of the informa-
tion page to be displayed in double height text.
• Press “ “ button once more for the full page of normal
height text.

To Reveal “concealed” Information

• Pressing “ “ button once will reveal answers on a quiz or
games page.
• Pressing “ “ button again will conceal the revealed an-
swers.

To Stop Automatic Page Change

The teletext page you have selected may contain more infor-
mation than what is on the screen; the rest of the information
will be displayed after a period of time.
• Press “ “ button to stop the automatic page change.
• Press “ “ button again to allow the next page to be dis-
played.

To Select a Subcode Page

Subcode pages are subsections of long Teletext pages that
can only be displayed on the screen one section at a time.
“ button will switch the
ENGLISH - 11 -
• Select the required Teletext page.
• Press “ “ button.
• Select the required subcode page number by pressing four
digit buttons (e.g. 0001).
• If the selected subcode page is not displayed in a short
time, press “ “ button. TV programme will be displayed on
the screen.
• Teletext page number will be displayed on the upper left cor-
ner of the screen when the selected page is found.
• Press “ “ button to display the selected Teletext page.

To exit Teletext

• Press “ ” button. The screen will switch to TV mode.

Fastext and Toptext

Teletext mode will be selected according to transmission au-
tomatically.
Your CTV supports the 8 page Teletext system. When the
page number of any of the 8 pages in memory is entered, the
system will not search for the requested page; instead it will
display the page automatically.
• Press “ “ button to move the Teletext screen forward
one page at a time.
• Press “ ” button to move the Teletext screen backward
one page at a time.
For Fastext and Toptext:
The subject-heading for the information may have a particular
colour or can be in a form located in a coloured box.
• Press an appropriate RED, GREEN, YELLOW or BLUE but-
ton in order to reach the relevant page quickly.
For TOPTEXT:
If Toptext transmission is present, colour coded buttons will
appear in status row.
If Toptext transmission is not present, status row will not ap-
pear.
In Toptext mode the “
the next or previous page respectively. If Toptext transmission
is not available, in case of operation of these commands,
wraparound occurs. For example page 100 appears to be one
greater than page 199.
“ or “ ” commands will request