Operating With The Onset Buttons; Operating With Remote Control; Menu System; Sound Menu - JVC AV-28BH8ENB Manual De Instrucciones

5. Press " " or "
you are now located. Then press the “ ” or “ ” button to
store it.
6. Press the MENU button to return to the AUTOSTORE
menu.
7. Press " " or "
Then press “ ” button to start the AUTOSTORE function.
The AUTOSTORE function automatically stores the re-
ceived channels in your TV's programme numbers.
After the AUTOSTORE function is finalized, "PROGRAM"
menu appears. You can delete a channel or swap two
channel numbers. For details, see "Program Menu" on
page 9.
8. Press the STANDARD button to complete the initial set-
tings.
If a channel you want to view is not stored, store it using
the TUNING menu. For details, see "Tuning Menu" on
page 8.

Operating with the onset buttons

Volume setting and programme selection can be made using
the buttons on the front panel.
Volume Setting:
• Press “- ” button to decrease volume or “
increase volume, so a volume level scale will be displayed
on the screen.
Programme Selecting:
• Press “P ” button to select next programme or “
ton to select the previous programme.
Entering Main Menu:
• Press “MENU” button to enter main menu. In the main
menu select submenu using “P
ter the submenu using “
usage of the menus, refer to the Menu System section of
this manual.

Operating with Remote Control

The remote control handset of your TV is designed to control
all the functions of the model you selected. The functions will
be described in accordance with the menu system of your
TV.
" button to select the country where
" button to select "Continue" item.
” or “ P” button and en-
+” or “- ” button. To learn the
Functions which you can use out of menu system are de-
scribed below.
Volume Setting:
Press “ ” button to increase volume.
Press “ ” button to decrease volume.
Programme Selecting (Previous or next programme):
• Press “
• Press “
Programme Selecting (direct access):
Press digit buttons on the remote control handset to select
programmes between 0 and 9. TV will switch to the selected
program after a short delay.
• For a two or three digit program number enter the second or
third digit after pressing the first digit within 2 seconds.

Menu System

Your TV has been designed with a menu system. Display
“MENU” (main menu) and enter one of four menus (PIC-
TURE, SOUND, INSTALL and FEATURE).
1- Press “MENU” button to display “MENU” (main menu).
The menu titles will be displayed in the main menu.
2- Press “
press “ ” or “ ” button to enter the menu.
• To exit a menu, press “STANDARD” button.
• To go to the previous menu, press “MENU” button.

Sound Menu

To change sound settings:
+” button to
• Press “MENU” button, now you are in main menu. In the
main menu, select SOUND using “
then enter the sound menu pressing “ ” or “ ” button.
P” but-
Setting Volume:
Using “
• Press “ ” button to increase volume.
• Press “ ” button to decrease volume.
ENGLISH - 5 -
” button to select the previous programme.
“ button to select the next programme.
“ or “ ” button to select a menu title, then
“ or “ ” button to select Volume.
“ or “ ” button,