JVC AV-28BH8ENB Manual De Instrucciones página 9

• Press “ “ or “ ” button to select the desired country
settings:
• After selecting the country, press the “ ” or “ ” button to
store the selected country.
• Press MENU key to go to the upper menu or press the
STANDARD button to turn the menu off.
Tuning Menu:
You can store a channel manually, or modify the current set-
tings of a channel (for example, changing the channel name).
If you want to modify the current settings of a channel, select
the channel of which you want to modify the setting. Then
display the main menu on the screen.
• Press “ “ or “ ” button to select "TUNING" item.
• Press “ ” or “ ” button to enter the "TUNING" sub-menu.
1. Press “ “ or “
"TUNING" menu. Then press “ ” or “ ” button to change
the setting.
For details of each item, see the explanations below.
2. After all settings of a channel are completed, press “
or “ ” button to select "Programme" item. Then press
“ ” or “ ” button to select a programme number which you
want to store the setting.
3. Press “ “ or “ ” button to select "Store" item. Then
press “ ” or “ ” button to store the setting.
The "STORED" appears at the bottom of the menu for 3
second.
” button to select an item in the
4. Press the MENU button to go to the upper menu, or press
the "Standard" button to turn the menu off.
In an AV mode, you can change only the "Mode" /
“Colour system” setting.
Search:
You can search a channel manually.
• Select "Search" item. Then press “ ” or “ ” button to start
searching. "SEARCHING" is displayed while the TV is
searching a channel.
• Searching stops when the TV finds a channel. Then the
channel is displayed.
• Press “ ” or “ ” button repeatedly until the channel you want
appears.
Standard:
The "Standard" setting is fixed to "B/G". You cannot change
this item's setting.
Colour system:
• If the picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
• Select "Colour system" item. Then press “ ” or “ ” button
to select a colour system.
Band, Channel:
• If you know a channel number, you can find it directly by
entering the channel number.
• Select the "Band" item. Then press “ ” or “ ” button to se-
lect the band (C or S) where the channel you want is lo-
cated.
• Select the "Channel" item. Then press “ ” or “ ” button to
select the channel number, or enter the channel number
with the digit buttons.
• The available channel numbers differ depending on your
"COUNTRY" and "Standard" settings.
Fine tuning:
If the channel reception is poor, fine-tune the channel.
• Select "Fine tuning" item. Then press “ ” or “ ” button to
fine -tune the channel.
“
Name:
You can store the channel name or change it.
• Select "Name" item. Then press “ ” or “ ” button to display
a cursor.
• Press “ “ or “
press “ ” or “ ” button to move the cursor.
• After the name is completed, press the MENU button.
ENGLISH - 8 -
” button to select a character and