On The Remote Control - Sony Walkman MZ-R900 Manual De Instrucciones

On the remote control

Labeling a disc during stop
1
Insert a disc.
To label a disc that is already in the
recorder, press x to stop.
2
Press DISPLAY for 2 seconds or
more.
3
Turn the control towards . or
towards N> until " EDIT" flashes
in the display, and then press x.
" : Name" flashes in the display.
4
Press x.
The disc is ready to be labeled.
5
Press the control towards . or
towards N> to select a letter and
press x to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press/ Turn
X
Control (VOL
+/– )
48
-GB
DISPLAY
PLAYMODE
X
Control
To
Switch between
capital letters,
small letters,
marks / numbers,
1)
and phrases.
Move the cursor to
the left or right.
Press/ Turn
Control
(./
N>)
DISPLAY
x
PLAYMODE
1)
If phrases are stored in the phrase bank,
the first phrase stored appears in the
display (page 51).
6
Repeat step 5 and enter all characters
of the label name.
To cancel labeling, press DISPLAY
for 2 seconds or more.
7
Keep pressing the x for 2 seconds or
more.
The track or disc is labeled.
Labeling a track during
playback
1
Insert a disc and play the track you
want to label.
2
Press DISPLAY for 2 seconds or
more.
3
Turn the control towards . or
towards N> until " EDIT" flashes
in the display, and then press x.
"
4
Press x.
The track is ready to be labeled.
5
Follow steps 5 to 7 of " Labeling a
disc during stop" .
To
Change the letter to
the one before /
next one.
Insert a blank space
to type in a new
letter by pressing
within 2 seconds.
Cancel labeling by
pressing for 2
seconds or more.
Delete a letter and
move back all
following letters to
the left.
: Name" flashes in the display.