Copying Cd Text Information While Recording (Joint Text) - Sony Walkman MZ-R900 Manual De Instrucciones

If you make a mistake while
setting the clock
Press x, and set the clock again from step
2. You can skip a step by pressing the jog
lever (L).
To display the current time
When the recorder is not operating or
while recording, press the jog lever (L),
flip the lever until " DISPLAY" appears in
the display, and then press the lever again.
Flip the jog lever (L) until " CLOCK"
flashes in the display, and then press the
lever again. The current time appears in
the display.
To display the time in the 24-
hour system
While setting the clock, press X. To
display the time in the 12-hour system,
press X again.
To maintain the correct time
Once you set the clock, it will keep correct time
as long as the recorder is connected to a power
source, such as the rechargeable battery,
alkaline dry battery, or AC power adaptor.
However, if no power source is connected, the
clock setting will change back to the factory
setting after about 3 minutes.
When changing the rechargeable battery or
alkaline dry battery, make sure to do it within 3
minutes.
Note
Make sure the time is correctly set if you want
the time stamp to be accurately recorded for an
important recording.
Copying CD text
information while
recording (Joint Text)
CD text connecting cable,
CD that support CD-TEXT,
and CD player that support
Joint Text required
By connecting the recorder to a Sony
portable CD player that supports Joint
Text (the CD text copying function) (D-
E990, etc.), you can copy track and disc
names automatically during recording. In
addition to the CD text connecting cable
(RK-TXT1), make sure to connect the
recorder to the portable CD player with an
optical cable.
Jog lever (L)
To i/LINE OUT
jack
To i/REMOTE jack
Portable CD player
(D-E990, etc.)
POC-5B etc.
REC
x
To LINE IN
(OPT) jack
RK-TXT1
To LINE OUT
(OPTICAL)
jack
31
-GB