On The Recorder; On The Remote Control - Sony Walkman MZ-R900 Manual De Instrucciones

On the recorder

Jog lever (L)
1
While the recorder is stopped,
playing, or play-paused, press the jog
lever (L).
2
Flip the jog lever (L) until
" PERSONAL" flashes in the display,
and then press the lever.
" Entry?" flashes in the display.
Entry?
3
Press the jog lever (L).
" Entry OK" appears in the display
and the disc settings are stored in the
recorder.

On the remote control

Control
1
While the recorder is stopped,
playing, or play-paused, press
DISPLAY for 2 seconds or more.
DISPLAY
x
2
Turn the control towards . or
towards N> until " PERSONAL"
flashes in the display, and then press
x.
" Entry?" flashes in the display.
3
Press x.
" Entry OK" appears in the display
and the disc settings are stored in the
recorder.
Erasing the disc information
Insert the disc whose information is to be
erased and verify its contents. Do steps 1
and 2 until " Erase?" flashes in the display,
and then press the jog lever (L) on the
recorder or x on the remote control.
" Erase OK" appears in the display and the
disc information is erased. If you try to
erase the disc information of a disc that
have never been stored, " No Entry!"
appears in the display for 2 seconds.
Notes
• The settings for up to 20 discs can be stored.
Any settings stored afterwards will replace the
settings for the least used disc among the 20.
• If you use another minidisc recorder to edit or
add tracks to a disc whose settings have been
stored on the recorder, the disc will no longer
be recognizable by the recorder and the stored
information will become useless.
39
-GB