Loading/Unloading A Cassette - JVC GR-AX847UM Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3
3
Erase Protection
1
2
2
Turn to take
up slack.
Gear

Loading/Unloading A Cassette

OPEN CASSETTE HOLDER
1
Slide EJECT until the holder opens. Do not use force
to open.
INSERT/REMOVE CASSETTE
2
Make sure the label is facing outward.
CLOSE CASSETTE HOLDER
3
Press PUSH and make sure the holder is closed and
locked.
NOTES:
A cassette holder can't be opened unless a power
supply is attached.
Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
Make sure the Erase Protection tab is in the position
that allows recording. If not, slide the tab. Some
cassettes have removable tabs. If the tab has been
removed, cover the hole with adhesive tape.
The cassette holder can't be opened while the
camcorder is in the record mode.
13
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gr-ax247um

Tabla de contenido