Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
18
Setting and starting a washing programme
WARNING!
Only interrupt or cancel a washing programme if necessary.
CAUTION!
Open the door carefully. Hot steam can come free.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of interruption.
Cancelling a washing programme
1. Press and hold function buttons B and C until all the programme lights come on.
2. Release function buttons B and C to cancel the washing programme.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent before you set a new washing programme.
Setting and starting a washing programme with delay start
1. Press the on/off button.
2. Set a washing programme.
– The programme indicator light comes on.
3. Press the delay start button until the indicator light with the correct number of hours
starts to flash (3, 6, or 9 hours).
4. Close the door.
– The countdown of the delay start starts.
– The countdown of the delay start decreases with steps of 3 hours.
When the countdown is completed, the washing programme starts automatically.
Do not open the door during the countdown to prevent interruption of the countdown.
When you close the door again, the countdown continues from the point of interruption.
Cancelling a delay start:
1. Press and hold function buttons B and C until all the programme lights come on.
– When you cancel a delay start, you also cancel the washing programme.
2. Set a new washing programme.
End of the washing programme
• The appliance stops automatically.
• The audible signal for the end of the programme operates.
1. Open the door.
– The end-of-programme indicator light comes on.
– The indicator light for the completed programme stays on.
2. Press the on/off button.
Publicidad
Capítulos
Tabla de contenido
