Genesis GLMT12 Manual Del Operario página 5

Herramienta oscilante multiuso de 12 v
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Feed the work piece in the correct direction and speed.
piece into a blade, cutter, or abrasive surface against the direction of the cutting tool's direction
of rotation only. Incorrectly feeding the work piece in the same direction may cause the work
piece to be thrown out at high speed.
• never leave the tool running unattended, turn the power off.
leave the tool until it comes to a complete stop.
• never start the power tool when any rotating component is in
contact with the work piece.
BATTERY TOOL USE AND CARE
Ensure the switch trigger is in the off position before inserting
battery pack.
accidents.
recharge only with the charger specified by the manufacturer
charger that is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
Use battery tools only with specified battery pack
packs may create a risk of injury and fire.
avoid storing battery pack in a container with other metal objects
such as nails, coins, clips, keys, screws, or other small metal objects that can make a
connection from one terminal to another. Always protect the battery terminals when battery
pack is not being used. Connecting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery
Avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Battery tools do not need to be plugged into an electrical outlet
therefore, they are always in operation condition. Be aware of possible hazards when not using
your battery tool or when changing accessories. Following this rule will reduce the risk of
electric shock, fire or personal injury.
Warning:
USE OF THiS TOOL Can gEnEraTE anD DiSBUrSE DUST Or OTHEr
airBOrnE ParTiCLES, inCLUDing WOOD DUST, CrYSTaLLinE SiLiCa DUST
anD aSBESTOS. Direct particles away from face and body. always operate
tool in a well-ventilated area and provide for proper dust removal. Use dust
collection system wherever possible. Exposure to the dust may cause serious
and permanent respiratory or other injury, including silicosis (a serious lung
disease), cancer, and death. avoid breathing the dust, and avoid prolonged
contact with the dust. allowing dust to get into your mouth or eyes, or lay on
your skin may promote absorption of harmful material. always use properly
fitting niOSH/OSHa approved respiratory protection appropriate for dust
exposure, and wash exposed areas with soap and water.
SERVICE
Have your power tool serviced by a qualified repair person using
only identical replacement parts.
is maintained.
Inserting the battery pack into power tools that have the switch on invites
This will ensure that the safety of the power tool
Feed the work
Do not
. A
. use of any other battery
.
,
5

Publicidad

Tabla de contenido
loading

Tabla de contenido