If The Inverter Fuse Blows - Schumacher Electric PID-410 Manual Del Usuario

Ocultar thumbs Ver también para PID-410:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

– The continuous load demand from the device exceeds the inverter's

wattage output.
– The inverter is overheated and automatically turns off for a period

of 1 to 3 minutes to cool. Make sure the inverter is well ventilated. It will
automatically restart after it cools.
– The vehicle's battery voltage is less than 10.5-volts.

– Short circuit, power surge or overload in the device.

8.

IF THE INVERTER FUSE BLOWS

Your power inverter is fitted with a fuse, which should not have to be replaced under
normal operating conditions. A blown fuse is usually caused by reverse polarity or a
short circuit within the device or equipment being operated.
If the fuse does blow, take the inverter to a qualified technician for repair.
• 13 •

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pif-410Pid-760Pif-760

Tabla de contenido