Design And Function; Complete Overview - Caso GERMANY VC12 Manual Del Usaurio

13 Design and Function

This chapter provides you with important safety notices on the design and
function of the device.
13.1

Complete overview

If you open the cover, you see the
Sealing strip:
the bag to seal but not to stick to the strip.
Please observe the following safety notices in order not to burn or scald
yourself or others.
► To avoid getting burned, never touch the sealing bar while the unit is
operating.
caso Vakuumierer VC12
A Seal only For sealing the bag without
vacuum.
B Indicator lamp (for seal) For indicate the
seal process.
C Cancel (Stop) For switch off the
vacuuming and sealing action whenever
the operator wants to stop the operation.
D Indicator lamp (for vacuum) For indicate
the vacuum process.
E Vacuum/Seal
Two functions:
- For vacuuming bags:
For draw air out of the bag and
automatically change operation to seal the
bag after vacuum is completed.
- For vacuuming zip bags:
Draws air from the zip bag (vacuuming).
However, the process must be ended with
"stop".
F Cover-lock To lock the cover. On the left
side and right side of the cover there is a
key-press.
G Cover-unlock Press to unlock the cover.
Contains a heating wire covered with Teflon which allows
Warning
41