Pausing Cd Playback; Using Compression And Bmx; Selecting The Search Method - Pioneer PREMIER SUPER TUNER IIID DEH-P560MP Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Built-in CD Player
1
Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
2
Press a to turn scan play on.
SCAN :ON appears in the display. The first 10
seconds of each track is played.
3
When you find the desired track press
b to turn scan play off.
SCAN :OFF appears in the display. The track
will continue to play.
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1
Press FUNCTION to select PAUSE.
Press FUNCTION until PAUSE appears in the
display.
2
Press a to turn pause on.
PAUSE:ON appears in the display. Play of the
current track pauses.
3
Press b to turn pause off.
PAUSE:OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1
Press FUNCTION to select COMP.
Press FUNCTION until COMP appears in the
display.
2
Press a or b to select your favorite set-
ting.
Press a or b repeatedly to switch between the
following settings:
COMP OFFCOMP 1COMP 2
COMP OFFBMX 1BMX 2

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
track.
1
Press FUNCTION to select FF/REV.
Press FUNCTION until FF/REV appears in the
display.
# If the search method ROUGH has been pre-
viously selected, ROUGH will be displayed.
2
Press c or d to select the search meth-
od.
Press c or d until the desired search method
appears in the display.
! FF/REV  Fast forward and reverse
! ROUGH  Searching every 10 track
Section
05
17
En

Publicidad

Tabla de contenido
loading

Tabla de contenido