Playing Tracks In A Random Order; Scanning Tracks Of A Cd; Pausing Cd Playback - Pioneer DEH-P8400MP Manual De Operación

Section
Built-in CD Player
05

Playing tracks in a random order

Random play lets you play back tracks on the
CD in a random order.
1 Press
OPEN
2 Press
FUNCTION
Press
FUNCTION
play.
3 Press 5 to turn random play on.
appears in the display. Tracks will
Random :ON
play in a random order.
4 Press ∞ to turn random play off.
appears in the display. Tracks will
Random :OFF
continue to play in order.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press
OPEN
2 Press
FUNCTION
Press
FUNCTION
display.
3 Press 5 to turn scan play on.
appears in the display. The first
Track Scan:ON
10 seconds of each track is played.
4 When you find the desired track press ∞ to
turn scan play off.
Track Scan:OFF
will continue to play.
• If the display has automatically returned to
the playback display, select
pressing
FUNCTION
26 En
to open the front panel.
to select .
RDM
until appears in the dis-
RDM
to open the front panel.
to select .
T.SCAN
until appears in the
T.SCAN
appears in the display. The track
again by
T.SCAN
.
Note
• After scanning of a CD is finished, normal
playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
1 Press to open the front panel.
OPEN
2 Press to select
FUNCTION
Press until
FUNCTION
display.
3 Press 5 to turn pause on.
appears in the display. Play of the
Pause :ON
current track pauses.
4 Press ∞ to turn pause off.
appears in the display. Play will
Pause :OFF
resume at the same point that you turned pause
on.
.
PAUSE
appears in the
PAUSE