Sony Handycam HDR-PJ50 Guía De Operaciónes página 11

Ocultar thumbs Ver también para Handycam HDR-PJ50:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

removing the battery pack or AC Adaptor
from the camcorder, or applying mechanical
shock or vibration to the camcorder when the
(Movie)/
(Photo) lamps (p. 24) or the
access lamp (p. 23) are lit or flashing
When using a shoulder belt (sold separately), do
not crash the camcorder against an object.
Do not use your camcorder in very loud areas.
On the drop sensor
To protect the internal hard disk from shock
by dropping, the camcorder has a drop
sensor function. When a drop occurs, or
under a nongravity condition, the block noise
made when this function is activated by the
camcorder may also be recorded. If the drop
sensor catches a drop repeatedly, recording/
playback may be stopped.
Note on using the camcorder at high
altitudes
Do not turn on the camcorder in a low-pressure
area, where the altitude is more than
5,000 meters (16,000 feet). Doing so may
damage the internal hard disk drive of your
camcorder.
US
11

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Handycam hdr-pj50vHandycam hdr-xr160

Tabla de contenido