Sony Handycam HDR-PJ50 Guía De Operaciónes página 35

When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V connecting

cable to the video input jack and connect the
white (left channel) or red (right channel) plug
to the audio input jack of your TV or VCR.
When connecting to your TV via a VCR
Connect your camcorder to the LINE IN input

on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE (VIDEO
1, VIDEO 2, etc.).

Notes
When you play back standard definition image

quality (STD) movies on a 4:3 TV that is not
compatible with the 16:9 signal, record movies
with 4:3 aspect ratio. Touch
[Image Quality/Size]  [
[4:3] 
.
When the A/V connecting cable is used to

output movies, movies are output with standard
definition image quality (STD).
Tips

If you connect your camcorder to the TV using

more than one type of cable to output images,
the order of priority of the TV input jacks is as
follows:
HDMI  component  S VIDEO  video
HDMI (High Definition Multimedia Interface)

is an interface to send both video/audio signals.
The HDMI OUT jack outputs high quality
images and digital audio.
(MENU) 
Wide Mode] 
On "Photo TV HD"
This camcorder is compatible with the
"Photo TV HD" standard. "Photo TV
HD" allows for highly-detailed, photo-like
depiction of subtle textures and colors.
By connecting Sony's Photo TV HD-
compatible devices using an HDMI cable
or the component AV cable
new world of photos can be enjoyed in
breathtaking full HD quality.
The TV will automatically switch to the
*
appropriate mode when [
selected with the Switch Image Type button.
Setup of the TV will be necessary. Please refer
**
to the instructions of your Photo TV HD-
compatible TV for details.
*
, a whole
**
PHOTO] is
US