Device Components; Bus Coupler I/O - Aventics DDL Instrucciones De Servicio

56 AVENTICS | DDL | R412009417–BDL–001–AD
Device description
5.2

Device components

5.2.1

Bus coupler I/O

9
8
7
6
Fig. 2: Bus coupler overview
1 LED displays for diagnostic messages
2 Bus slave label
3 X71 (BUS IN) connection for the bus coupler to control the
1)
valves
4 X72 (BUS OUT) connection for the bus coupler to control
further DDL participants
5 X10 (POWER) connection to supply the valve solenoids
6 Screw cap A 0.6 + 0.2 Nm: Switch S5 to set the DDL address
and S6 to select the DDL baud rate and the output data length
7 Screw cap B 0.6 + 0.2 Nm: Switch S1 to select the valve
power supply
8 FE connection 4 + 0.5 Nm
9 Pocket for slide-in labels (see "Spare parts and accessories"
on page 84)
1)
For plug assignment see page 60.
9
1)
1
2
3
4
5